Search Images Maps Play YouTube News Gmail Drive More »
Sign in
Books Books
" Then insert the cork and zinc rod, passing the glass tube through the hole prepared for it. Push the cork gently down until its lower surface is nearly in contact with the liquid. The air will thus be nearly all expelled, and the cell should be left in... "
Guide to the Practical Elements of Electrical Testing - Page 40
by J. Warren - 1901 - 186 pages
Full view - About this book

Proceedings of the Royal Society of London, Volume 51

Royal Society (Great Britain) - Electronic journals - 1892
...above the mercury to a depth of rather more than 2 cm. Then insert the cork and zinc rod, passing the glass tube through the hole prepared for it. Push...cell should be left in this condition for at least twenty-four hours before sealing, which should be done as follows : — Melt some marine glue until...
Full view - About this book

Report

British Association for the Advancement of Science - Science - 1892
...above the mercury to a depth of rather more than 2 cm. Then insert the cork and zinc rod, passing the glass tube through the hole prepared for it. Push...cell should be left in this condition for at least twenty, four hours before sealing, which should be done as follows : — Melt some: marine glue until...
Full view - About this book

Proceedings of the Royal Society of London, Volume 51

Royal Society (Great Britain) - Electronic journals - 1892
...above the mercury to a depth of rather more than 2 cm. Then insert the cork and zinc rod, passing; the glass tube through the hole prepared for it. Push...The air will thus be nearly all expelled, and the coll should be left in this condition for at least twenty-four hours before scaling, which should be...
Full view - About this book

Report of the Annual Meeting, Volume 61

British Association for the Advancement of Science - Science - 1892
...above the mercury to a depth of rather more than 2 cm. Then insert the cork and zinc rod, passing the glass tube through the hole prepared for it. Push the cork gently dowu until its lower surface is nearly in contact with the liquid. The air will thus be nearly all...
Full view - About this book

Transactions, Volume 10

Electric engineering - 1893
...above the mercury to a depth of rather more than 2 cm. Then insert the cork and zinc rod, passing the glass tube through the hole prepared for it. Push...cell should be left in this condition for at least 2i hours before sealing, which should be done as follows : — Melt some marine glue until it is fluid...
Full view - About this book

Practical Physics

Sir Richard Glazebrook, Sir Napier Shaw - Physics - 1893 - 663 pages
...above the mercury to a depth of rather more than 2 cm. Then insert the cork and zinc rod, passing the glass tube through the hole prepared for it. Push...cell should be left in this condition for at least twenty-four hours before sealing, which should be done as follows : — Melt some marine glue until...
Full view - About this book

The Electrical Engineer

Electrical engineering - 1893
...mercury to a depth of rather more than two centimetres. Then insert the cork and zinc rod, passing the glass tube through the hole prepared for it. Push...The air will thus be nearly all expelled, and the coll should be left in this condition for at least 24 hours before sealing, which should be done as...
Full view - About this book

Elementary Lessons in Electricity & Magnetism

Silvanus Phillips Thompson - Electricity - 1894 - 638 pages
...centimetre. Then insert the cork and zinc rod, passing the glass tube through the hole prepared for it. Hush the cork gently down until its lower surface is nearly...hours before sealing, which should be done as follows: The cell may be sealed in a more permanent manner by coating the marine glue, when it is set, with...
Full view - About this book

Report of the Annual Meeting, Volume 63

British Association for the Advancement of Science - Science - 1894
...mercury to a depth of rather more than 2 centimetres. Then insert the cork and zinc rod, passing the glass tube through the hole prepared for it. Push...cell should be left in this condition for at least twentyfour hours before sealing, which should be done as follows : — Melt some marine glue until...
Full view - About this book

Report of the Annual Meeting, Volume 64

British Association for the Advancement of Science - Science - 1894
...mercury to a depth of rather more than 1 centimetre. Then insert the cork and zinc rod, passing the glass tube through the hole prepared for it. Push...cell should be left in this condition for at least twentyfour hours before sealing, which should be done as follows. Melt some marine glue until it is...
Full view - About this book




  1. My library
  2. Help
  3. Advanced Book Search
  4. Download EPUB
  5. Download PDF