 | Science - 1895 - 1104 pages
...of pure silver some 30 square centimeters in area and 2 or 3 millimeters in thickness. This shall be supported horizontally in the liquid near the top of the solution by a silver rod riveted through its center. To prevent the disintegrated silver which is formed on the anode... | |
 | National Academy of Sciences (U.S.) - Science - 1888 - 840 pages
...of pure silver some 30 square centimeters in area and 2 or 3 millimeters in thickness. This shall be supported horizontally in the liquid near the top of the solution by a silver rod riveted through its center. To prevent the disintegrated silver which is formed on the anode... | |
 | Great Britain - Law - 1894 - 610 pages
...anode should be a plate of pure silver some 30 square centimetres in area and 2 or 3 millimetres in thickness. This is supported horizontally in the liquid...prevent the disintegrated silver which is formed on the anode from falling on to the kathode, the auode should be wrapped round with pure filter paper, secured... | |
 | Electrical engineering - 1891 - 680 pages
...depth. The anode should be a plate of pure silver some 30 square centimetres area and 2mm. or 3 mm. in thickness. This is supported horizontally in the liquid near the top of the solution by a platinum 'A ire (tossed through holes in the plates at opposite corners. To prevent the disintegrated silver... | |
 | British Association for the Advancement of Science - Science - 1892 - 1258 pages
...depth. The anode should be a plate of pure silver some 30 square cm. in area and 2 or 3 millimetres in thickness. This is supported horizontally in the liquid...prevent the disintegrated silver which is formed on the anode from falling on to the kathode, the anode should be wrapped round with pure filter paper, secured... | |
 | British Association for the Advancement of Science - Science - 1892 - 1146 pages
...depth. The anode should be a plate of pure silver some 30 square cm. in area> and 2 or 3 millimetres in thickness. This is supported horizontally in the liquid...prevent the disintegrated silver which is formed on the anode from falling on to the kathode, the anode should be wrapped round1 with pure filter paper, secured... | |
 | Chemistry - 1892 - 644 pages
...in depth. "The anode should be a plate of pure silver some 30 square cm. in area and 2 or 3 mm. in thickness. " This is supported horizontally in the liquid near the top of (he solution by a platinum wire passed through holes in the plate at opposite corners. To prevent the... | |
 | Electric engineering - 1893
...anode should be a plate of pure silver, some 30 square cm. in area, and two or three millimetres in thickness. This is supported horizontally in the liquid...prevent the disintegrated silver which is formed on the anode from falling onto the cathode, the anode should be wrapped around with pure filter paper, secured... | |
 | American Institute of Electrical Engineers - Electric engineering - 1893 - 780 pages
...anode should lie a plate of pure silver, some 30 square cm. in area, and two or three millimetres in thickness. This is supported horizontally in the liquid...prevent the disintegrated silver which is formed on the anode from falling onto the cathode, the anode should be wrapped around with pure filter paper, secured... | |
 | Electrical engineering - 1893 - 630 pages
...of pure silver some 30 square centimetres in area, and two or three millimetres in thickness. Thia is supported horizontally in the liquid near the top...prevent the disintegrated silver which is formed on the anode from falling on to the cathode, the anode should be wrapped round with pure filter paper, secured... | |
| |
The anode should be a plate of pure silver some 30 square centimetres in area and 2 or 3 millimetres in thickness. This is supported horizontally in the liquid near the top of the solution by a platinum wire passed through holes in the plate at opposite... 
